pusher centrifuge

ISSUING TIME：2022-04-12 09:09 VIEWS:

HOTLINE：
138-2137-9267

CONSULT

INTRODUCTION

The pusher centrifuge is continuously working filtration centrifuges. The solids are retained as a cake on the wedge wire basket and transported by an oscillating step-by-step movement of the inner basket axially in the direction of the solids discharge. With the pusher centrifuge, the transport speed of the solids on the wedge wire basket is slower than with a worm/screen centrifuge. This results in a longer retention time of the material allowing increased wash efficiency and lower discharge moistures.

We have developed different components for this pusher centrifuge, which allows the final design to meet the specific application in order to widest range of uses. We have two or three stage rotating parts based on the application and filtration rate.

Use for

Rock salt	Raw phosphate	Potassium sulphate	Potassium sulphate	Polyacrylate	NPK fertiliser
Nickel sulphate	Melamine	Lactose	Hexamine	Glauber salt	Fructose
Urea	Tartaric acid	Subsequent	Sorbic acid	Sodium sulphate	Sorbic acid
Sorbic acid	Sodium phosphate	Sodium formate	Sodium chloride	Sodium bicarbonate	Silicon fluoride
concentrate	residues from aluminum	Dispersion rubber	Copper sulphate	Chlorine hydrate	Animal bones
Ammonium sulphate	Ammonium chloride	Adipic acid	ABS polymerisate	Zinc sulphate	Rough coal slurry

Available frame sizes

Type	250	350	400	550	600	700	800	900	1000
Oil pump motor KW	3.0	5.5	11	22	22	22	37	45	55
Drive motor KW	7.5	22	22	30	37	45	55	75	90
Length mm	1050	1150	1200	1980	2560	2650	2750	3300	3600
Width mm	800	850	900	1120	2000	2100	2100	2200	2300
Height mm	900	950	1000	1100	1770	1850	2000	2100	2200
Weight kg	800	1000	1500	3000	5500	6000	9500	11000	12000
We reserve the right to update parameters